Improve production efficiency of polyurethane blended materials
Scouring agent for PU blended fabrics：SUNMORL WX-615
The synthetic-PU knit fabrics contain a lot of processing oils. Many dyeing problems like uneven dyeing, rope mark and specks are easily occurred. Therefore production efficiency of the mills is not well because a lot of rework, increase of process and off specification products are occurred for synthetic-PU knit fabrics.
Let us introduce the new scouring agent which improve both quality of the goods and production efficiency and take a look our Development Story.
Increasing Polyurethane Blended Materials and High Mixing of Polyurethane
As a fashion trend of the spots under wear for comfortableness, we can see the increase of use the strechable knits or garments utilized PU fiber and the mixing ratio of PU fiber has been increased.
We have seen a lot of dyeing problems on these fabrics, especially high PU fiber blended fabrics, because of not enough degreasing at the scouring process.
Request for compliance with accelerated environmental regulations
Increase of production efficiency and correspondence for the environmental regulations are very important task for the mills.
The environmental regulations have become more strict by each goverment. And the organization like bluesign® or ZDHC is saying to the textile industory saving water, energy and emission control.
NICCA started to develop the new scouring agent which not only decreases the processing trouble but also decreases the emission of the chemicals to the environment.
SUNMORL WX-615 contributes to improvement of processing quality, production efficiency, and compliance with environmental regulations
Followings are the benefits of SUMORL WX-615 especially for synthetic-PU fabrics.
- Increase the goods quality and production efficiency due to it's strong degreasing and oil emulsifying property.
- Saving water and energy and reducing process time by decrease of rework or unnecessary process.
- It's COD value is almost 1/2 compared conventional products!
Please feel free to contact us. We can explain more datails.
R&D Person in Charge
NICCA Taiwan
R&D Dept.
Chen Chi-Che
NICCA Taiwan
R&D Dept.
Chen Hsiung-Fu
Back to the list